Products - Shenzhen Derman Lighting Co., Ltd
中文 English
 
Products
LED Downlight
Lens Series
Frosted Series
LED Tube
LED T5 tube
LED T6 tube
LED T8 tube
LED T10 tube
LED Panel Light
Round series
Rectangle series
Water Cube series
RGB+W series
Up-down lighting series (NEW)
LED Flood Light
TG3B series
COB series
Module series
LED Tri-proof Light
A series (Alu + PC housing)
B series (All PC housing)
IP67 series(All PC housing)
HB series (High Bay Lighting)
LED High Bay Light
COB series (30w-80w)
CREE + MW series (60w-240w)
UFO series (130 lm/w)
UFO-E series (150 lm/w)
 
 Productshow
Product Name:

4FT-150W Tri-proof (Philips + MW)



       
 
 
     
 
Description:

 

Simple Description:

 

Item No.:

DM-4FT150W-HB

LED Power: 150W Efficiency of the Power Supply: > 87%
Work Voltage: AC 100V240V Color Rendering Index: Ra>80
Dimension: 1200*150*67mm Beam Angle: 120° 
LED type: Philips 3030 LEDs IP grades: IP65
Power Factor(PF): > 0.9 Color Temperature: 2700K7000K
System Luminous Efficiency: >110lm/W Net Weight(kg): 4.5
System Initial luminous Flux: 16500-18000lm warranty: 5 years

 

Materials:

 

1. High lumen Philips 3030 LEDs as light source

2. High efficiency Meanwell driver with active >0.95 PFC function

3. High quality 6063# Aluminum housing and Aluminum LED plate

 

Features:

 

1. Linear appearance design, can be surface mounted, or hanging installed.

 

2. Superior raw materials, high quality 6063# aerospace Aluminum housing with advanced thermal performance. Good wear-resisting property.

 

3. Different length are available: 600mm, 900mm, 1200mm, 1500mm

 

4. High quality light source. The attenuation of SMD LED light source is less than 3% per 1,000hrs aging test under temperature 50 degrees celsius, CRI>80Ra, LM80 standard.

 

5. Advanced high efficiency Meanwell driver with active >0.95 PFC function, with short circuit protection, open circuit protection and overload protection.

 

6. Special circuit design, each group of LEDs can work separately, avoiding any problem of lighting output caused by single faulty LED.

 

7. Strict quality control, lighting aging for 48hrs and complete inspection before delivery.

 

8. Solid-state, high shock resistant, strong packaging, convenient to transportation.

 

9. Easy to install, low maintenance cost. Cut cost by reducing re-lamp frequency, especially in difficult to reach area that requires lift.

 

♥ Working areas:

 

Widely used for meeting room, factory office building, commercial plazas, public facilities, schools, hospitals and places which need high power lighting and high CRI etc.

 

 

 

    Copyright © 2010-2024 Derman Lighting All Right Reserved.      POWERED BY SZWEBER